VLMO30.., vlms30.., vlmy30.. www.vishay.com vishay semiconductors rev. 1.6, 03-nov-15 1 document number: 81322 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 low current smd led plcc-2 description these new devices have been designed to meet the increasing demand for alln gap based low current smd leds. the package of the vlm.30.. is the plcc-2 package. it consists of a lead frame which is embedded in a white thermoplast. the reflector inside this package is filled up with clear epoxy. product group and package data ? product group: led ? package: smd plcc-2 ? product series: low current ? angle of half intensity: 60 features ? smd led with exceptional brightness ? compatible with automatic placement equipment ? eia and ice standard package ? compatible with ir re flow, vapor phase and wave solder processes according to cecc 00802 and j-std-020 ? available in 8 mm tape ? low profile package ? non-diffused lens: excellent for coupling to light pipes and backlighting ? very low power consumption ? luminous intensity ratio in one packaging unit i vmax. /i vmin. 1.6 ? esd withstand voltage: up to 2 kv according to jesd22-a114-b ? preconditioning according to jedec ? level 2a ? aec-q101 qualified ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? automotive: backlighting in dashboards and switches ? telecommunication: indica tor and backlighting in telephone and fax ? indicator and backlight fo r audio and video equipment ? indicator and backlight for battery driven equipment ? indicator and backlight in office equipment ? flat backlight for lcds, switches, and symbols ? general use 19225 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. vlms3000-gs08 super red 2.8 10 - 2 624 630 636 2 - 1.8 2.2 2 allngap vlms3000-gs18 super red 2.8 10 - 2 624 630 636 2 - 1.8 2.2 2 allngap vlms30j1k2-gs08 super red 4.5 8.5 11.2 2 624 630 636 2 - 1.8 2.2 2 allngap vlms30j1k2-gs18 super red 4.5 8.5 11.2 2 624 630 636 2 - 1.8 2.2 2 allngap vlms30k1l2-gs08 super red 7.1 10.5 18 2 624 630 636 2 - 1.8 2.2 2 allngap vlms30k1l2-gs18 super red 7.1 10.5 18 2 624 630 636 2 - 1.8 2.2 2 allngap vlms30j1l2-gs08 super red 4.5 10 18 2 624 630 636 2 - 1.8 2.2 2 allngap vlms30j1l2-gs18 super red 4.5 10 18 2 624 630 636 2 - 1.8 2.2 2 allngap vlms30j2k2-gs08 super red 5.6 8.5 11.2 2 624 630 636 2 - 1.8 2.2 2 allngap vlms30j2k2-gs18 super red 5.6 8.5 11.2 2 624 630 636 2 - 1.8 2.2 2 allngap vlms30k2l2-gs08 super red 9 12 18 2 624 630 636 2 - 1.8 2.2 2 allngap VLMO3000-gs08 orange 5.6 16 - 2 600 605 609 2 - 1.8 2.2 2 alingap VLMO3000-gs18 orange 5.6 16 - 2 600 605 609 2 - 1.8 2.2 2 alingap
VLMO30.., vlms30.., vlmy30.. www.vishay.com vishay semiconductors rev. 1.6, 03-nov-15 2 document number: 81322 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) driving the led in reverse direction is suitable for short term application note (1) in one packing unit i vmax. /i vmin. 1.6 VLMO30k1l2-gs08 orange 7.1 15 18 2 600 605 609 2 - 1.8 2.2 2 alingap VLMO30k1l2-gs18 orange 7.1 15 18 2 600 605 609 2 - 1.8 2.2 2 alingap VLMO30l1m2-gs08 orange 11.2 16.5 28 2 600 605 609 2 - 1.8 2.2 2 alingap VLMO30l1m2-gs18 orange 11.2 16.5 28 2 600 605 609 2 - 1.8 2.2 2 alingap VLMO30k1m2-gs08 orange 7.1 16 28 2 600 605 609 2 - 1.8 2.2 2 alingap VLMO30k1m2-gs18 orange 7.1 16 28 2 600 605 609 2 - 1.8 2.2 2 alingap vlmy3000-gs08 yellow 4.5 11.6 - 2 581 587 594 2 - 1.8 2.2 2 alingap vlmy3000-gs18 yellow 4.5 11.6 - 2 581 587 594 2 - 1.8 2.2 2 alingap vlmy3001-gs08 yellow 7.1 11.8 18 2 581 587 594 2 - 1.8 2.2 2 alingap vlmy3001-gs18 yellow 7.1 11.8 18 2 581 587 594 2 - 1.8 2.2 2 alingap vlmy30j2l1-gs08 yellow 5.6 10.6 14 2 581 587 594 2 - 1.8 2.2 2 alingap vlmy30j2l1-gs18 yellow 5.6 10.6 14 2 581 587 594 2 - 1.8 2.2 2 alingap vlmy30k2m1-gs08 yellow 9 12.3 22.4 2 581 587 594 2 - 1.8 2.2 2 alingap vlmy30k2m1-gs18 yellow 9 12.3 22.4 2 581 587 594 2 - 1.8 2.2 2 alingap vlmy30j2m1-gs08 yellow 5.6 11.6 22.4 2 581 587 594 2 - 1.8 2.2 2 alingap vlmy30j2m1-gs18 yellow 5.6 11.6 22.4 2 581 587 594 2 - 1.8 2.2 2 alingap absolute maximum ratings (t amb = 25 c, unless otherwise specified) vlm30.. parameter test condition symbol value unit reverse voltage (1) v r 6v dc forward current i f 15 ma surge forward current t p 10 s i fsm 0.1 a power di ssipation p v 40 mw junction temperature t j 125 c operating temperature range t amb -40 to +100 c storage temperature range t stg -40 to +100 c thermal resistance junction / ambient mounted on pc board (pad size > 16 mm 2 )r thja 400 k/w optical and electrical characteristics (t amb = 25 c, unless otherwise specified) VLMO30.., red parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 2 ma vlms3000 i v 2.8 10 - mcd i f = 2 ma vlms30j1k2 i v 4.5 8.5 11.2 mcd i f = 2 ma vlms30k1l2 i v 7.1 10.5 18 mcd i f = 2 ma vlms30j1l2 i v 4.5 10 18 mcd i f = 2 ma vlms30j2k2 i v 5.6 8.5 11.2 mcd i f = 2 ma vlms30k2l2 i v 91218mcd dominant wavelength i f = 2 ma d 624 630 636 nm peak wavelength i f = 2 ma p - 635 - nm angle of half intensity i f = 2 ma ? - 60- deg forward voltage i f = 2 ma v f -1.82.2v reverse voltage i r = 10 a v r 615- v parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max.
VLMO30.., vlms30.., vlmy30.. www.vishay.com vishay semiconductors rev. 1.6, 03-nov-15 3 document number: 81322 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmax. /i vmin. 1.6 note (1) in one packing unit i vmax. /i vmin. 1.6 note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. the above type numbers represent the order grous which include only a few brightness grou ps. only one group will be sh ipped in one reel (there wi ll be no mixing of two gr oups on each reel). in order to ensure availability, single brightness groups will not be orderable. in a similar manner for colors where wa velength groups are measured and binned, single wa velength groups will be shipped in any one reel. in order to ensure availability, single wave length groups will not be orderable. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmy30.., orange parameter test condition pa rt symbol min. typ. max. unit luminous intensity (1) i f = 2 ma VLMO3000 i v 5.6 16 - mcd i f = 2 ma VLMO30k1l2 i v 7.1 15 18 mcd i f = 2 ma VLMO30l1m2 i v 11.2 16.5 28 mcd i f = 2 ma VLMO30k1m2 i v 7.1 16 28 mcd dominant wavelength i f = 2 ma d 600 605 609 nm peak wavelength i f = 2 ma p - 610 - nm angle of half intensity i f = 2 ma ? - 60- deg forward voltage i f = 2 ma v f -1.82.2v reverse voltage i r = 10 a v r 615- v optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmy30.., yellow parameter test condition pa rt symbol min. typ. max. unit luminous intensity (1) i f = 2 ma vlmy3000 i v 4.5 11.6 - mcd i f = 2 ma vlmy3001 i v 7.1 11.8 18 mcd i f = 2 ma vlmy30j2l1 i v 5.6 10.6 14 mcd i f = 2 ma vlmy30k2m1 i v 9 12.3 22.4 mcd i f = 2 ma vlmy30j2m1 i v 5.6 11.6 22.4 mcd dominant wavelength i f = 2 ma d 581 587 594 nm peak wavelength i f = 2 ma p - 585 - nm angle of half intensity i f = 2 ma ? - 60- deg forward voltage i f = 2 ma v f -1.82.2v reverse voltage i r = 10 a v r 615- v luminous itensity classification group standard light intensity (mcd) optional min. max. h 1 2.8 3.55 2 3.55 4.5 j 14.55.6 25.67.1 k 17.19.0 2 9.0 11.2 l 1 11.2 14.0 2 14.0 18.0 m 1 18.0 22.4 2 22.4 28.0
VLMO30.., vlms30.., vlmy30.. www.vishay.com vishay semiconductors rev. 1.6, 03-nov-15 4 document number: 81322 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? wavelengths are tested at a current pulse duration of 25 ms. typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - forward current vs. pulse length fig. 3 - relative luminous in tensity vs. angular displacement fig. 4 - relative intensity vs. wavelength color classification group yellow orange dom. wavelength (nm) min. max. min. max. 1 581 584 2 583 586 600 603 3 585 588 602 605 4 587 590 604 607 5 589 592 606 609 6 591 594 crossing table vishay osram VLMO30k1l2 lot67k-k1l2 VLMO30k1m2 lot67k-k1m2 VLMO30l1m2 lot67k-l1m2 vlms30j1k2 lst67k-j1k2 vlms30j1l2 lst67k-j1l2 vlms30k1l2 lst67k-k1l2 vlmy30j2l1 lyt67k-j2l1 vlmy30j2m1 lyt67k-j2m1 vlmy30k2m1 lyt67k-k2m1 0 5 10 15 20 25 i f - forward current (ma) 18254 100 80 60 40 20 0 t amb - ambient temperature (c) 10 100 1000 0.01 0.1 1 10 100 t p - pulse duration (ms) 17557 i f - forward current (ma) t p /t= 0.01 0.05 0.2 0.5 1 0.02 0.1 0.4 0.2 0 95 10319 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity ? - angular displacement 0.0 0.2 0.4 0.6 0.8 1.0 1.2 540 580 620 660 700 - wavelength (nm) 18266 i v rel - relative luminous intensity orange red yellow
VLMO30.., vlms30.., vlmy30.. www.vishay.com vishay semiconductors rev. 1.6, 03-nov-15 5 document number: 81322 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - forward current vs. forward voltage fig. 6 - relative luminous inte nsity vs. ambient temperature fig. 7 - forward voltage vs. ambient temperature 1 10 100 1 1.5 2 2.5 3 v f - forward voltage (v) 95 10878 i f - forward current (ma) 0 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 - 40 - 20 0 20 40 60 80 100 t amb - ambient temperature (c) 18251 i v rel - relative luminous intensity yellow orange red 1.65 1.70 1.75 1.80 1.85 1.90 1.95 2.00 - 40 - 20 0 20 40 60 80 100 t amb - ambient temperature (c) 18252 v f rel - forward voltage (v) yellow orange red
VLMO30.., vlms30.., vlmy30.. www.vishay.com vishay semiconductors rev. 1.6, 03-nov-15 6 document number: 81322 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters drawing-no.: 6.541-5067.01-4 s pecification s according to din technical drawing s i ss ue: 6; 23.09.13 dimen s ion s in mm c a ?2.4 pin identification 3.5 0.2 1.75 0.1 0.9 2.8 0.15 2.2 3 +0.15 0 . 8 mounting pad layout 4 4 1.2 2.6 (2.8) 1.6 (1.9) dimen s ion s : reflow and vapor pha s e (wave s oldering) area covered with s olderre s i s t
VLMO30.., vlms30.., vlmy30.. www.vishay.com vishay semiconductors rev. 1.6, 03-nov-15 7 document number: 81322 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 method of taping / polarity and tape and reel smd led (vlm.3 - series) vishays leds in smd packages are available in an antistatic 8 mm blister tape (i n accordance with din iec 40 (co) 564) for automatic compo nent insertion. the blister tape is a plastic strip with impressed component cavities, covered by a top tape. taping of vlm.3... fig. 8 - tape dimens ions in mm for plcc-2 reel package dimension in millimeters for smd leds, tape option gs08 (= 1500 pcs.) fig. 9 - reel dimensions - gs08 reel package dimens ion in millimeters for smd leds, tape option gs18 (= 8000 pcs.) preferred fig. 10 - reel dimensions - gs18 soldering profile fig. 11 - vishay lead (pb)-free reflow soldering profile (acc. to j-std-020) fig. 12 - double wave soldering of opto devices (all packages) adhesive tape component cavity blister tape 94 8670 1.85 1.65 4.0 3.6 3.6 3.4 2.05 1.95 1.6 1.4 4.1 3.9 4.1 3.9 5.75 5.25 8.3 7.7 3.5 3.1 2.2 2.0 0.25 94 8668 180 178 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 14.4 max. 10.0 9.0 120 94 8665 identification label: vishay type group tape code production code quantity 321 329 identification 4.5 3.5 2.5 1.5 13.00 12.75 62.5 60.0 14.4 max. 10.4 8.4 120 18857 label: vishay type group tape code production code quantity 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperature (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 19885 ir reflow soldering profile for lead (pb)-free soldering preconditioning acc. to jedec level 2a max. 2 cycles allowed 255 c 235 c to 260 c 2 k/s ca. 200 k/s second wave first wave 5 s full line: typical dotted line: process limits time (s) temperature (c) lead temperature 300 250 200 150 100 50 0 0 50 100 150 200 250 948626-1 ttw soldering (acc. to cecc00802) 100 c to 130 c forced cooling ca. 2 k/s ca. 5 k/s
VLMO30.., vlms30.., vlmy30.. www.vishay.com vishay semiconductors rev. 1.6, 03-nov-15 8 document number: 81322 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bar code product label (example) a) type of component b) manufacturing plant c) sel - selection code (bin): e.g.: k1 = code for luminous intensity group 3 = code for color group d) date code year / week e) day code (e.g. 5: friday) f) batch no. g) total quantity h) company code 106 37 a h bc d e f g vishay 20119
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
